Tecfluid MT03F - Manual (Page 5)

5
1 INTRODUCTION
MT03F converters are flow rate indicators, totalizers and controllers for batching
processes.
The electronic circuit is based on the most advanced technology in digital signal
processing, in order to obtain accurate and reliable measurements.
The equipment provides the following features (depending on the model):
 Graphic display with intuitive menus.
 Pulse input compatible with oscillating piston flowmeters series COVOL and
turbine flowmeters series TM, as well as with most of existing pulse transmitters
on the market.
 Volume preset and relay outputs for batching processes.
 Flow rate, totalizer and accumulated total indication.
 Pulse output (input signal repeater).
 Current output (4-20 mA) proportional to the flow rate and user programmable.
 Relay outputs user programmable as flow rate alarm.
2 RECEPTION
The MT03F converters are supplied conveniently packaged for transportation together
with their instruction manual for installation and operation.
All devices have been verified in our facilities.
2.1 Storage temperature
-20ºC ...... +60ºC
3 INSTALLATION
3.1 Location
The MT03F converter is housed in a box according to IEC 61554 standard. Its size is 96x96
mm and is intended to be mounted on a panel of a cabinet with a square hole of 90 x 90 mm
+0.5 mm / -0 mm. The cabinet should have a minimum depth of 90 mm behind the panel.
To place it into the cabinet, slide it through the front panel to the bottom as shown in the
following figure. Then screw the clamping arms until exert pressure on the panel.