Tecfluid MT03F - Manual (Page 19)

19
If 4mA is selected, pressing the key (Enter) toggles between 4, 8, 12, 16 and 20 mA,
allowing to check the adjustment of the analog output.
NOTE: To make the diagnosis of pulse input the frequency should be less than 2 Hz.
7 PROGRAMMING PARAMETERS
By programming the converter the visualization and the outputs of the instrument can be
configured.
Turn on the converter and press (Enter) to enter the main menu. The following screen
appears:
Pressing the key (Enter) while selecting Relay 1 or Relay 2 will activate or deactivate this
output. When the relay is ON, the word is shown in reverse text.
In either case, the circle next to the word "Pulse" is shown in black every time the equipment
receives a pulse.