Tecfluid MT03F - Manual (Page 14)

14
To change the access password of
the programming menu, select
"Programming" in the main menu
and then "Password".
5 MAIN MENU
To access the main menu of the converter, press the key (Enter). The following screen
appears
:
To change the access password of
the installation menu, select
"Installation" on the main menu and
then "Password".
The "Installation" option allows the basic configuration of the instrument, as explained in
Chapter 6 of this manual.
The "Programming" option allows to program all parameters of the converter, as
explained in Chapter 7 of this manual.
From the "Reset totalizer" option, the user can return the totalizer to zero. When exiting
the menu, the totalizer will begin to accumulate again.
Note: The “Reset totalizer” operation requires the program password input (see section
5.1).
The options "Software Version" and "Serial Number" are informative and are discussed in
Chapters 9 and 10 of this manual.
5.1 Passwords to access the menus
The password for the installation menu may be different from the password for the
program menu.
By default, the equipment is factory configured with the password disabled.
If you want to change any of these passwords, you must enter the corresponding menu
and once inside, access the submenu "Password".
Number of menu items
Selected item