Tecfluid MT03F - Manual (Page 25)

25
The first three screens show the relay output status, if they are activated.
If the relay is in alarm mode, an “A” will appear in normal or inverse format depending on
the relay status.
If the relay is in batching mode, a “B” will appear in normal or inverse format depending
on the relay status.
The two relay outputs are independent. It can be programmed one as alarm and the other
as batching.
The converter presents the selected screen when a power failure occurs.
the following default screens can be programmed:
- Flow rate
- Flow rate + Totalizer
- Flow rate + Accumulated total
- Totalizer
- Accumulated total
- Accumulated total + Totalizer
7.7 Default screen