Tecfluid MX4 For FLOMID Series - Manual (Page 33)

33
7 CONVERTER PROGRAMMING
By programming the converter the visualization and the outputs of the instrument can be
configured.
Turn on the converter and press (Enter) to enter the main menu. The following screen
appears
Once the password is entered, the first screen allows to choose between the different
programming options.
7.1 Language
You can choose the language in which all the menus will be displayed.
With the keys (Down / Left) and (Up), select Programming, and then validate with the key
(Enter).
If the converter has the password option enabled, a password must be entered. For more
details about the password,, see section 5.1 on page 27.
CONVERTER PROGRAMMING
7