beautypg.com

3 – preparations, Making connections – Teac CD-200SB User Manual

Page 16

background image

16

TASCAM CD-200SB

3 – Preparations

Making connections

Examples of connections that can be made with a CD-200SB are shown below.

8

Precautions before making connections

• Before connecting other devices, read their operation manuals carefully and connect them properly.
• Turn the power OFF or set the power to standby for this unit and all units to be connected to it.
• Set up all the units so that they are powered from the same line. When using a power strip, for example, use a thick cable with a high

current capacity to reduce fluctuation of the power voltage.

Mixer,
Recorder,
Amplifier, or
other device

ANALOG

IN

(UNBALANCED)

Digital mixer,
Digital recorder,
Digital amplifier, or
other device

DIGITAL

IN

(OPTICAL)

DIGITAL

IN

(COAXIAL)

ANALOG IN

(BALANCED)

Mixer,
Recorder,
Amplifier, or
other device

8

Connecting analog audio devices

Connect the analog output jacks of this unit to the input jacks

of a stereo amplifier, mixer, recorder or other device with analog

inputs.

NOTE

Cables are not included with this unit.
Do not bundle RCA cables with power cords or speaker

cables. Doing so could cause reduced audio quality or noise.

8

Connecting digital audio devices

Connect a digital output jack (coaxial or optical) of this unit

to the input jack of a stereo amplifier, mixer, recorder or other

device with a digital input.

NOTE

The sampling frequency of this unit’s digital output is always

44.1 kHz regardless of the playback media/file sampling

frequency.

During playback of audio CD, digital output is possible

when the pitch control function is in use, but the sampling

frequency is changed by an amount equivalent to the pitch

control value. When the pitch control function is on, some

devices might not be able to accept signals from the digital

outputs of this unit.