Teac CR-H260I - Manual (Page 41)

41
ENGLISH
You can listen to the audio signals of video players, televi-
sions, portable audio players, cassette decks and other
devices by connecting their line level or headphone out-
puts to the AUX1 and AUX2 jacks on this unit.
1 3
1
Press the SOURCE button repeatedly to
select “AUX1” or “AUX2”.
You can also select “AUX1” or “AUX2” by pressing the
remote control's AUX1 or AUX2 button.
2
Start playback on the connected device.
3
Turn the VOLUME knob to adjust the volume.
Listening to a connected device RDS (only for Europe) (1)
The Radio Data System (RDS) is a broadcasting service that
allows stations to send additional information along with
the regular radio program signal.
RDS works on the FM frequency band in Europe only.
1
Tune in to an FM RDS station (see page 38).
2
Press the RDS button (or the RDS button of
the remote control unit).
Pressing the RDS button cycles through RDS modes as
follows:
Program service (PS)
When you select Program service, “PROGRAM SERVICE” will
blink for about 3 seconds and then the program service
name or station's name will be displayed. If there is no pro-
gram service data, the frequency will be displayed.
RDS Program type (PTY)
When you select RDS Program type, “RDS PROGRAM TYPE”
will blink for about 3 seconds and then the program type
will be displayed.
Continued on the next page e