Teac CR-H260I - Manual (Page 36)

36
Direct playback (CD/USB/SD)
You can use the remote control's Number buttons to select
a track/file during playback and when playback is stopped.
Press the Number buttons to select a track/file.
Playback starts from the selected track.
p Direct playback is only possible when the display shows
the ordinary information.
p Direct playback is not possible when searching forward
or backward.
Examples:
To select track number 2:
Press “0”, “0” and “2”, or press “2” and the PLAY/PAUSE button
(7/9).
p If you press “2” and wait for a few seconds, playback will
start from track 2.
To select track number 12:
Press “0”, “1” and “2”, or press “1”, “2” and the PLAY/PAUSE button
(7/9).
p If you press “1” and “2” and wait for a few seconds, play-
back will start from track 12.
To select track number 123 (MP3/WMA files only):
Press “1”, “2” and “3”.
Clearing the program
Press the PROGRAM button when playback is stopped to
clear all program contents.
p The following actions will also clear the programmed
contents:
u Pressing the unit's PROGRAM button
u Pressing the unit’s SOURCE button
u Pressing the AUX 1, AUX 2, TUNER, CD, iPod/USB, SD
or Bluetooth button on the remote control
u Pressing the STANDBY/ON button
u Opening the disc tray
u Disconnecting the AC power cord
Programmed Playback (CD/USB/SD) (3)