Teac CR-H260I - Manual (Page 40)

40
Manually setting station presets
1
Tune in to a station you want to add as a pre-
set (page 38 ).
2
Press the PROGRAM button.
“__” blinks on the display.
Example:
FM PM01:17
CH__ 79.50MHz
3
Within 20 seconds, select a preset channel
number to store the station.
Preset tuning (2)
p For example, to set preset number 15, press “1”, “5”
and the ENTER button.
p If you do not press the ENTER button within 20 sec-
onds of selecting the channel, the selection will be
cancelled.
p If you store a new station to a preset channel, the
station previously stored as that channel will be
overwritten.
To store more station presets, repeat steps 1 to
3
.
Listening to a preset station
Use the Number buttons or the Skip buttons
(.//) to select the preset.
or
p If the Number buttons do not function, press the TUNER
button and then try again.