In-e-hyclip di-v1_10 – Digi HygroClip DI digital interface User Manual
Page 2

IN-E-HyClip DI-V1_10
Rotronic AG
Bassersdorf, Switzerland
Document code
Unit
Instruction Manual
Document Type
HygroClip DI digital interface: instruction
manual
Document title
Page 2 of 24
© 2007; Rotronic AG
IN-E-HyClip DI-V1_10.doc
Contents:
About the version number:
This manual is valid for instruments with firmware version 1.0 (check using the ROTRONIC HW4
software, Device Manager). Changes in the last digit of the version number reflect minor changes
in the internal software of the instrument that do not affect the manner in which the instrument
should be operated.
IMPORTANT: operation of the HygroClip DI requires a PC with the ROTRONIC HW4 software
version 1.2.2 or higher. Instructions for using the HW4 software are not included in this manual.
These instructions are shipped separately on the software CD ROM.