Digi HygroClip DI digital interface - Manual (Page 10)

IN-E-HyClip DI-V1_10
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
Instruction Manual
Document Type
HygroClip DI digital interface: instruction
manual
Document title
Page 10 of 24
© 2007; Rotronic AG IN-E-HyClip DI-V1_10.doc
Device Information
● Device name: this text will be displayed next to the instrument model information. As far as
possible use a unique device name.
● RS485 address: click on the underlined link to change the instrument address to be used in
conjunction with an RS-485 network (multi-drop). Each network address should be unique
and within the values of 0 to 63. Note: the default factory RS-485 address is 0. Unless
necessary, do not manually modify this address. HW4 will automatically change the RS-485
address of the device, if so required.
● Device Protection: for a description of this function, see Device Protection in this manual.