Super Systems Compact HMI - Manual (Page 50)

Compact HMI and Compact HMI Editor Operations Manual
Super Systems Inc. Page 50 of 60
3. Once the files are successfully exported,
eject the storage medium by using the
“Safely remove hardware” option in
Windows (typically found by expanding
the system tray and selecting the
“remove hardware” icon, an example of
which is shown in Figure 56).
Figure 56 – “Safely Remove Hardware” icon
4. Turn on the touch screen.
5. Once the touch screen is on and the startup has completed, exit the SSi controller
application. (Refer to the controller manual or contact SSi at (513) 772-0060 if you have
questions about how to do this.) The operating system screen will appear once the
controller application is shut down. It will look similar to the screen pictured in Figure
57.
Figure 57 - Touch Screen Operating System Screen
6. Insert the storage medium into an
available USB port on the touch screen.
Often, a port can be found on the back of
the touch screen, as shown in Figure 58.
Figure 58 - Inserting USB Drive into USB Port on
Touch Screen Device
NOTE: SSi recommends that you back up touch screen files onto a USB drive or other
storage medium before overwriting those files (which is part of the procedure described
in Step 7). Touch screen files are the .cfxml and .tdx files contained in the
\CompactRealtime folder. If your organization has a backup system in place, these files
should be backed up using that system.