Super Systems DAQ - Manual (Page 7)

Super Systems Inc. Page 7 of 34 DAQ Operations Manual
the 2 devices to communicate. The DAQ will have the network setting already setup with a
default IP address – normally supplied by the customer. This can be modified through the
Configurator software.
Network settings can be found through the Control Panel in Microsoft Windows. By selecting
Network Setting , the operator will be given a list of the current available connection types.
Using the crossover cable will require the “Local Area Connection” as seen in the diagram to be
modified.
The Properties can be changed by highlighting the connection and using the right mouse button
to click and select the Properties tab or by highlighting the connection and clicking on Change
setting of this connection. Once the Local Area Connection Properties screen is displayed,
highlight the Internet Protocol (TCP/IP) option. Click the Properties button to display Internet
Protocol (TCP/IP) Properties. On the Internet Protocol (TCP/IP) Properties tab, you will need to
select the option for Use The Following IP Address.