Super Systems DAQ - Manual (Page 3)

Super Systems Inc. Page 3 of 34 DAQ Operations Manual
Introduction
The SSi DAQ data acquisition module is a simple, powerful and expandable product for
measuring a vast array of signals in the process control environment. The DAQ can be used
with as few as 3 inputs and can be expanded to as many as 48 per DAQ depending upon your
needs. Each SSi fully-isolated 3 input analog module can be configured on an input-by-input
basis for a range of voltage inputs from as little as 20 mV to as much as 10V or for a 4 - 20 mA
current signal. Communications to the DAQ are available via Modbus serial protocol or through
the DAQ's Ethernet port via ModbusTCP. Calibration and configuration are available through
SSi's Configurator software (provided) and the DAQ also features a limited web server for
simple interfacing from any PC in your plant (Ethernet communications required).
DAQ Wiring Diagram