Device configuration – Super Systems DAQ User Manual

Page 18

Super Systems Inc. Page 18 of 34

DAQ Operations Manual

Host 485 Address

This option will allow the user to set the Host 485 address. The range is 1 through 249.

Slave 1 (5,6) Baud

This option will allow the user to set the Slave 1 baud rate. The options are:

1200

19200

115200

2400

28800

4800

38400

9600

57600

14400

76800

IP Address/IP Mask/IP Gateway

These options will allow the user to change the various IP addresses of the DAQ. Contact Super

Systems Inc at 800-666-4330 or your IT department for help in changing any of these addresses.

Note: Once the IP address has been changed, communications with the DAQ will be lost until

the correct IP address is entered on the

System Management

screen

section above)

. Clicking on any of these options will

allow the user to change all of the options at once.

Device Configuration

The

Device Configuration

menu option will allow the user to change certain configuration

options on the DAQ. Currently, the only option to change is the Temperature Mode option.

Temperature Mode

This option will allow the user to change the mode of the temperature. The options are °F or

°C.