Sundance SMT784 - Manual (Page 31)

User Manual SMT784 Page 31 of 31 Last Edited: 19/03/2009 14:12:00
10 Safety
This module presents no hazard to the user when in normal use.
11 EMC
This module is designed to operate from within an enclosed host system, which is
build to provide EMC shielding. Operation within the EU EMC guidelines is not
guaranteed unless it is installed within an adequate host system.
This module is protected from damage by fast voltage transients originating from
outside the host system which may be introduced through the output cables.
Short circuiting any output to ground does not cause the host PC system to lock up
or reboot.
12 Physical Properties
Dimensions 21cm x 13cm x 4cm
Weight 250g
Supply Voltages +12V
+5V
+3.3V
-5V
-12V
MTBF
13 Ordering Information
Several variations of this product are available. Various FPGA types, speed grades,
clock speeds and signal coupling are available. Please contact Sundance for further
information.
14 EMC
This module is designed to operate from within an enclosed host system, which is
build to provide EMC shielding. Operation within the EU EMC guidelines is not
guaranteed unless it is installed within an adequate host system.
This module is protected from damage by fast voltage transients originating from
outside the host system which may be introduced through the output cables.
Short circuiting any output to ground does not cause the host PC system to lock up
or reboot.