Sundance SMT370v2 - Manual (Page 22)

Version 2.0 Page 22 of 46 SMT370v2/v3 User Manual
The default FPGA firmware implements 2 16-bit interfaces.
FPGA Pinout.
###########################################
###
# #
# Constraint File Virtex II for SMT370
#
#
#
#Author:Philippe ROBERT
#
NET "ADCA_DATA<2>" LOC = "AA7" ;
#$Date:23.07.2002
#
#$Version:1.0-Original draft
#
NET "ADCA_DATA<5>" LOC = "Y8" ;
#$Date:09.09.2002
#
#$Version:1.1-CP1 removed+Clock synth.
changed#
#$Date:23.07.2002
#
#$Version:1.0 generated with FloorPlanner
#
#$Version:1.1 generated with FloorPlanner
#
#$Version:1.2 IIOFs added on V11, W12 and
C11# #Version 1.3 ADCA and ADCB data lines
swapped #
#been put back in the right order
#
NET "ADCB_DATA<1>" LOC = "AA11" ;
# (c) Sundance Multiprocessor Technology
#
###########################################
########
CONFIG PART=XC2V1000-FG456-6 ;
# Start of Constraints extracted by
Floorplanner from the Design
NET "FREQ_MASTER_RESET" LOC="C16";
NET "FREQ_CLK_SEL_ADCs<0>" LOC = "D21" ;
NET "FREQ_CLK_SEL_ADCs<1>" LOC = "F18" ;
NET "FREQ_CLK_SEL_DAC<0>" LOC = "E16" ;
NET "FREQ_CLK_SEL_DAC<1>" LOC = "E17" ;
NET "FREQ_CLK_SEL<0>" LOC = "D21" ;
NET "FREQ_nP_LOAD_ADCs" LOC = "B18" ;
NET "FREQ_nP_LOAD_DAC" LOC = "D17" ;
NET "FREQ_S_CLOCK_ADCs" LOC = "A19" ;
NET "FREQ_S_CLOCK_DAC" LOC = "A17" ;
NET "FREQ_S_DATA_ADCs" LOC = "B19" ;
NET "FREQ_S_DATA_DAC" LOC = "B17" ;
NET "FREQ_S_LOAD_ADCs" LOC = "A18" ;
NET "FREQ_S_LOAD_DAC" LOC = "C17" ;
NET "ADCA_DATA<0>" LOC = "W9" ;
NET "ADCA_DATA<1>" LOC = "AB9" ;
NET "ADCA_DATA<3>" LOC = "U9" ;
NET "ADCA_DATA<4>" LOC = "V8" ;
NET "ADCA_DATA<6>" LOC = "AA6" ;
NET "ADCA_DATA<7>" LOC = "Y7" ;
NET "ADCA_DATA<8>" LOC = "W7" ;
NET "ADCA_DATA<9>" LOC = "AB7" ;
NET "ADCA_DATA<10>" LOC = "AA5" ;
NET "ADCA_DATA<11>" LOC = "Y6" ;
NET "ADCA_DATA<12>" LOC = "W6" ;
NET "ADCA_DATA<13>" LOC = "AB6" ;
NET "ADCA_OVR" LOC = "W8" ;
NET "ADCA_RDY" LOC = "V7" ;
NET "ADCB_DATA<0>" LOC = "U10" ;
NET "ADCB_DATA<2>" LOC = "V6" ;
NET "ADCB_DATA<3>" LOC = "AB5" ;
NET "ADCB_DATA<4>" LOC = "V9" ;
NET "ADCB_DATA<5>" LOC = "AB10" ;
NET "ADCB_DATA<6>" LOC = "AA10" ;
NET "ADCB_DATA<7>" LOC = "U11" ;
NET "ADCB_DATA<8>" LOC = "AA9" ;
NET "ADCB_DATA<9>" LOC = "Y10" ;
NET "ADCB_DATA<10>" LOC = "W10" ;
NET "ADCB_DATA<11>" LOC = "V10" ;
NET "ADCB_DATA<12>" LOC = "AA8" ;
NET "ADCB_DATA<13>" LOC = "Y9" ;
NET "ADCB_OVR" LOC = "Y11" ;
NET "ADCB_RDY" LOC = "AB8" ;
NET "IIOF_1" LOC = "W12" ;
NET "IIOF_2" LOC = "C11" ;
NET "ADCB_RDY_GCLK" LOC = "Y12" ;