Sundance SMT365G - Manual (Page 16)

Version 1.0.0 Page 16 of 23 SMT365G User Manual
General Requirements
The module must be fixed to a TIM40-compliant carrier board.
The SMT365G TIM is in a range of modules that must be supplied with a 3.3v power
source. In addition to the 5v supply specified in the TIM specification, these new
generation modules require an additional 3.3v supply to be presented on the two
diagonally-opposite TIM mounting holes. The lack of this 3.3v power supply should
not damage the module, although it will obviously be inoperable; prolonged operation
under these circumstances is not recommended.
The SMT365G is compatible with all Sundance TIM carrier boards. It is a 5v tolerant
module, and as such, it may be used in mixed systems with older TIM modules,
carrier boards and I/O modules.
Use of the TIM on SMT327 (cPCI) motherboards may require a firmware upgrade. If
LED D6 on the SMT365G remains illuminated once the TIM is plugged in and
powered up, the SMT327 needs the upgrade. The latest firmware is supplied with all
new boards shipped. Please contact Sundance directly if you have an older board
and need the upgrade.
The external ambient temperature must remain between 0°C and 40°C, and the
relative humidity must not exceed 95% (non-condensing).
Power Consumption
The power consumption of this TIM is dependent on the operating conditions in terms
of core activity and I/O activity. The maximum power consumption is 10W.
Weight
SMT365G weigh approximately 56.25 grams.