Fpga space availability, Code composer, Operating conditions – Sundance SMT365G User Manual
Page 15: Safety, Fpga space availability code composer, Safety emc
Version 1.0.0
Page 15 of 23
SMT365G User Manual
FPGA space availability
The firmware is generated with Xilinx ISE.
Table below gives the device utilization summary after placing and routing the
firmware:
SMT365G
XST
compatible
Yes
Number of
RAMB16s
40% (16)
Number of
SLICEs
44% (2289)
Number of
BUFGMUXs
12% (2)
Number of
TBUFs
30% (780)
Code Composer
This module is fully compatible with the Code Composer Studio (CCS) debug
environment (version 2 or later). This extends to both the software and JTAG
debugging hardware.
The name of the C64xx CCS device driver is tixds64xx_11.dvr, and should be
obtained from Texas Instruments. In case of difficulty please contact
Operating Conditions
Safety
The module presents no hazard to the user.
EMC
The module is designed to operate within an enclosed host system that provides
adequate EMC shielding. Operation within the EU EMC guidelines is only guaranteed
when the module is installed within an appropriate host system.
The module is protected from damage by fast voltage transients introduced along
output cables from outside the host system.
Short-circuiting any output to ground does not cause the host PC system to lock up
or reboot.