Sdl/communication ports, Shb-half word (16-bits sdb) firmware version, Sdb clock selection – Sundance SMT365G User Manual
Page 13: Interrupts interrupts sdl/communication ports shb, Interrupts
Version 1.0.0
Page 13 of 23
SMT365G User Manual
Interrupts
See general firmware description [7]
SDL/Communication ports
The SMT365G provides 6 ComPorts. They are ComPort 0, 1, 2, 3, 4 and 5.
SMT365G implements only ComPort interface.
SHB
SMT365G’s firmware is available in 1 version:
• SHB-Half Word (16-bits SDB) firmware version.
See SHB [4] or SDB [3] technical specifications and general firmware description [7]
for more details.
SHB-Half Word (16-bits SDB) firmware version
This configuration of the SMT365G provides four Sundance Digital Buses(SDB).
They are numbered SDB0 for SDBA, SDB1 for SDBB, SDB2 for SDBC, SDB3 for
SDBD.
SDBC
SDBA
SDBD
SDBB
SDB Clock selection
The SDB clock selection is not available. The SDB runs at 100Mhz. This clock is
provided by an on-board oscillator.
Altering SDBCLK value won’t have any effect.