Sumix SMX-M7xx - Manual (Page 85)

Trigger Connector
85 SMX-M7x Series USB2.0 Camera User Guide
Figure 9-12 Inserting of a cable in the rear part of the connector
Then insert it into the main part.
Figure 9-13 Inserting of a cable in the main part of the connector
When a cable is inserted into the rear part and the main part correspondingly, solder
each pin of the connector with opened contacts of a cable according to the layout (see
“Soldering of Connector with Cable” on page 77 ) and your specific needs:
Figure 9-14 Inserting and soldering of a cable to the inner part of the connector
cable
Pins of the
connector for
soldering Opened contacts
of a cable for sol-
dering