Getting image using the scanner and camera wizard – Sumix SMX-M7xx User Manual
Page 59
WIA: How it Works
59
SMX-M7xx Series USB2.0 Camera User Guide
Figure 7-2 Scanners and Cameras
Now you can use WIA to get images from the camera.
Getting Image Using the Scanner and Camera Wizard
To get the image using the Scanner and Camera Wizard:
1
Connect the SMX-M71M, SMX-M72 or SMX-M73 camera to your computer.
2
Open Control Panel>Scanners and Cameras.
3
Select the SMX-M7x USB2.0 Camera WIA and do one of the following:
●
Right-click and select Get picture using Scanner Wizard
●
Double-click the selection