Studio Technologies 591 - Manual (Page 27)

Issue 1, September 1999 Model 58/591 User Guide
Page 30 Studio Technologies, Inc.
Press and hold both insert buttons for
5 seconds to restore Model 591 factory
defaults. Once defaults have been
restored, the LEDs will light. After
buttons are released, configuration
mode will be maintained.
Model 591 Configuration—Restore Factory Defaults
Factory Defaults: Both channels associated with both inserts are in mode 2: Maintain the normal signal flow;
functions disabled.
Monitor output mode is A/B select.
Power-up mute mode is disabled.
Remote level control input disabled.
No channels selected for bypass; function disabled.
Bypass mode is follow monitor output A/B select button.
Reference level is set for fully attenuated (minimum) monitor output level.
Input source preset A set for input 1 routed to L, input 2 routed to R.
Input source preset B set for input 3 routed to L, input 4 routed to R.
Input source preset C set for no input selected; function disabled.
Input source preset D set for no input selected; function disabled.
15dB dim level.
Contact input 1 disabled.
Contact input 2 disabled.
Note: The 5-second delay is a safety feature, ensuring that the factory defaults will not be accidently
restored.
&