Studio Technologies 591 - Manual (Page 22)

Model 58/591 User Guide Issue 1, September 1999
Studio Technologies, Inc. Page 25
Model 591 Configuration—Insert 1 and 2
When an insert button is pressed, pressing
the output channel buttons (one at a time)
allows the display and selection of the insert
mode for that specific channel.
Default: Both channels associated with both inserts are in mode 2: Maintain the normal signal flow; function
disabled.
Note 1: This is the hardest configuration to understand and perform! Two buttons must be simultaneously pressed
to display the mode; three buttons must be simultaneously pressed to change the mode. A little practice
and it will become easy.
Note 2: If both channels associated with an insert section are set for mode 2, that insert section will be set for
disabled. This feature is provided so that the operator won’t attempt to enable an unused insert, hopefully
minimizing confusion.
When an insert button and an output channel button
are pressed at the same time, the insert mode is displayed.
LED 1-L lit means mode 1: Mute normal signal flow;
LED 2-L lit means mode 2: Maintain the normal signal flow;
LED 3-L lit means mode 3: Replace the normal signal with the return signal;
LED 4-L lit means mode 4: Sum (combine) the return signal with the normal signal.
Use the buttons to select the mode.
Press and hold one of the
insert buttons to allow the
display and selection of
the insert mode.
&