Studio Technologies 50 2004 - Manual (Page 23)

Model 50/51 User Guide Issue 6, September 2004
Studio Technologies, Inc. Page 23
Model 51 Configuration Chart—Alternate Functions
Press and hold Level
Up to activate alternate
configure functions
Press Talk to Studio to
toggle phones interrupt
and phones add; LED
on means talk to
phones is add
Press and hold Phones/Studio, then press
CR/Studio 1 to toggle between normal
headphone source and headphones follow
control room source; LED on means head-
phones follow control room
Press Slate to toggle to
50Hz slate tone; LED on
means 50Hz tone is on
Press and hold Phones/Studio,
then press CR/Studio 2 to toggle
between normal dub source and
dub follows control room source;
LED on means dub follows
control room
Press and hold Phones/Studio,
then press CR/Studio 3 to configure
remote control room source select;
LED on means function enabled
Press and hold Phones/Studio,
then press CR/Studio 4 to configure
channel associated with remote
control room source select;
LED off means channel 6 selected;
LED on means channel 7
Press and hold Phones/Studio,
then press CR/Studio 5 to toggle the
state of the level control auto mute
function; when the LED is lit the
function is enabled