SOMFY CORD LIFT WIREFREE CL32 RTS - Manual (Page 7)

8 Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
5.4. Recording the RTS transmitter
After recording the end limits:
%ULHÀ\ SUHVV WKH SURJUDPPLQJ EXWWRQ RQ
the back of the transmitter. The shade jogs.
The transmitter is recorded.
If desired, to set the MY position, move the
shade to the desired position with the UP
or DOWN button then press the MY button
until the shade jogs.
PROG.
)DYRULWHSRVLWLRQ0
6. OPERATION
1) Move the shade away from the end
limits.
2)Simultaneously press the UP and DOWN
buttons until the shade jogs.
3) Press and hold the MY and DOWN
buttons simultaneously until the shade jogs
to change from Roller mode to Tilting mode.
0RGHVHOHFWLRQ5ROOHURU7LOWLQJPRGH
The Cord Lift 32 RTS is designed to work in 2 modes: Tilting mode or Roller mode.
This feature allows the Roll Up 28 RTS to be set according to the type of blind you are
working with.
The Cord Lift 32 RTS is set by default to work in Roller mode.
1
2 3