SOMFY CORD LIFT WIREFREE CL32 RTS - Manual (Page 11)

12 Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
Find an RTS transmitter (A) programmed in
the motor.
Press and hold the RTS programmed trans-
mitter (A) PROG button or the motor PROG
button until the shade jogs: the motor is in
programming mode.
Quickly press the RTS transmitter(B)
PROG button to add or delete: the shade
jogs and the RTS transmitter
is programmed or deleted from the motor.
To delete all the programmed transmitters,
press and hold the motor PROG button
until the shade jogs twice.
All the transmitters are deleted.
To reset the motor, press and hold the
PROG button on the motor head until the
shade jogs 3 times.
All the settings are erased.
7.8. Erasing the memory of the motor
$GGLQJ'HOHWLQJ576WUDQVPLWWHU
7.7. Erasing the transmitters from the memory
A B A A A B B
PROG.
A
PROG.
B
x2
x3