SOMFY CORD LIFT WIREFREE CL32 RTS User Manual

Page 6

Text mode
Original mode

The end limits can be set in any order.

1) Press and hold the UP button to move the
shade to the desired position. If necessary
adjust the Up position, using the UP or
DOWN buttons.
2) Press the MY and DOWN buttons
simultaneously and release them once the
shade begins to move.
The up limit is memorized.
3) Press the MY button when the shade
reaches the desired Down position.
If necessary adjust the down position, using
the UP or DOWN buttons.
4) Press the MY and UP buttons
simultaneously and release them when the
shade begins to move.
The Down limit is memorized. The shade
moves up and will stop at its upper limit.

7RFRQ¿UPWKHHQGOLPLWVSUHVVDQGKROG
the MY button until the shade jogs.The end
limits are recorded.

5.3. Adjusting the end limits