Smart Avi SignagePro - Manual (Page 42)

SmartAVI SignagePro Manual 38
(c) 2010 SmartAVI
figure 6.3.7
§ 6.3.B Run Schedule after a power failure
If you need a schedule to start by itself even if you disconnect the SignagePro Player from a
network and re-plug the power, you will need to follow those steps:
a) We will need to have SignagePro Player to be connected to the network so the server would
see it and that would allow us to apply new settings.
First, open SignagePro Manager software and go to the Task Manager, where you will need to
create a schedule or modify existing one. (figure 1)