Smart Avi SignagePro - Manual (Page 104)

SmartAVI SignagePro Manual 100
(c) 2010 SmartAVI
§ Sample Network Configuration #2
Configuration #2
Router/Switch/Hub without a DHCP server in a same network*
Connect the SignagePro server and the SignagePro client to a hub using CAT-5 or CAT-6
cables.
· Manually assign IP numbers to the server.
A sample might look like the following:
Server IP number: 192.168.0.185
Server IP Mask: 255.255.255.0
Server IP Gateway: Put the address of a network gateway
Here is a description on how to put an IP address manually in Windows XP environment.
1. Go to the Start Menu and click on the Control Panel Icon.
Go to the Control Panel