Dyna-Glo Kerosene Portable Forced Air Heaters KFA400DGD - Manual (Page 15)

14
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
10. REPLACING FUSE
NOTICE : This heater is fuse protected.
If your heater fails to ignite, DO NOT RETURN YOUR HEATER TO THE
STORE.
Please follow the simple instruction below to inspect and change the fuse.
WARNING : SHOCK HAZARD
To prevent personal injury, unplug the power cord before replacing fuse.
1. Unplug heater.
2. Turn Fuse Cover COUNTERCLOCKWISE 45° using a flat blade screwdriver and remove Fuse
from Fuse Holder.
3. Replace Fuse with enclosed fuse.
WARNING : FIRE HAZARD
To avoid fire, Do not substitute with a higher or lower current rating.
4. Turn Fuse Cover CLOCKWISE 45° using a flat blade screwdriver while slightly pushing.
NOTE : Specified fuse rating : 250VAC/20A
PROCEDURE FOR REPLACING FUSE
Figure 17. Replacing Fuse
Fuse Holder
Fuse
Fuse Cover