Sierra Video ADC-8432 - Manual (Page 28)

5-2 •••• Specifications ADC-8432 User Manual (Rev. 1.1)
Table 6. ADC-8432 - Technical Specifications
Category Parameter Specification
Analog Input
Number of Inputs 2 balanced channels (1 stereo pair)
Connector Terminal Block (Weco™)
Input Impedance >20kOhms
Nominal Input Level +4dB
Reference Input
Signal
Audio – AES-3id/AES-3 (depending on the rear
module) 32kHz, 44.1kHz, 48kHz, 96kHz, 192kHz
Input Impedance Selectable between 75, 110 and HI
AES Input Level
200mV p-p minimum
2.5V p-p maximum
AES/EBU
Output
Number of Outputs
Full Rear Module: 4
Split Rear Module: 2
Connector
BNC or Terminal Block (Weco)
(depending on rear module)
Sample Rate
DARS or AES Ref or internal reference of 32kHz to
192kHz
Output Impedance 75 or 110Ω (depending on rear module)
Output Level 1.0V p-p ±10%
Performance
Quantization 24bits
Frequency Response ±0.1dB @ 48kHz (20Hz to 20kHz)
Signal to Noise Ratio -110dB unweighed
Measured at –20dBFS -112 dB ‘A’ weighted, -120dB CCITT weighted
THD+N at –20dBFS -110dB (<0.002%)
Crosstalk <-80dB
Jitter <10mUI peak @ 48kHz (AES reference)
Other
Maximum Power Consumption 4W
Warranty 5 year transferable
Specifications are subject to change without notice.