Sierra Video ADC-8432 - Manual (Page 25)

ADC-8432 User Manual (Rev. 1.1) Control and Monitoring •••• 4-1
Control and Monitoring
In This Chapter
This chapter provides a detailed explanation of controlling and monitoring your ADC-8432.
The following topics are discussed:
• DashBoard Control System Software
• The Menu System
DashBoard Control System
The DashBoard Control System enables you to monitor and control openGear frames and controller
cards from a computer. DashBoard communicates with other cards in the DFR-8310 series frame
through the MFC-8310-N Network controller card. This card is required in order to use the DashBoard
Control System to configure the ADC-8432.
The DashBoard Control System software and user manual can be downloaded from the Sierra Video
website.
Using the DashBoard Menus
You must first install the DashBoard Control System on your computer. Refer to the DashBoard User
Manual for software installation procedures and using DashBoard.
The Menu System
The following sections and tables describe the Configuration and Status menus, with items, and
parameters available on the ADC-8432, accessed from DashBoard.