Seaward ARE 1557 User Manual
Page 18
![background image](https://www.manualsdir.com/files/804150/content/doc018.png)
ERT1557
Operating Instructions
- 18 -
6.3.7. If there are no stored results in the selected
memory location then a message
no is
displayed on the LCD.
6.3.8. Repeat step 6.3.1 to recall results from other
memory locations.
6.4 Erasing individual results
6.4.1. Press F4 (Shift) + F1 (Recall) function keys to
enter recall mode. As an indication the small
object identification number and
RCL are
displayed in the bottom right hand corner of the
LCD.
6.4.2. Press F1 (
D) or F2 (Ñ) function keys to select the
desired object identification number.
6.4.3. Press (F4) Shift + F1 (Recall) function keys once
again to select the measuring place field.
6.4.4. Press F4 (Shift) + F2 (
Ñ) function keys once
again to select the measuring place number.
6.4.5. Press F4 (Shift) +F3 (Distance) function keys to
clear the displayed earth resistance. The LCD
display will indicate
Clr.
6.4.6. When an attempt is made to clear a memory
location where no result is stored then the
message
no is displayed on the LCD.
6.5 Clearing all the memory
6.5.1. Select the rotary switch to Data Clear position.
6.5.2. Press F4 (Shift) +F3 (Distance) function keys to
clear all memory locations. As an indication
message
Clr starts blinking on the LCD display.
6.5.3. Press F4 (Shift) +F3 (Distance) function keys
once again to erase the whole memory. The LCD