Seaward DP6 User Manual
Page 10
Operating Instructions
Thermocouple Calibrator Type DP6
9
DESCRIPTION OF CONTROLS
1. Value Display
4. Function Keys
2. Configure display
5. ON/OFF Keys
3. Increment/Deferment
Keys & Keyboard Value entry
RIGHT HAND CONFIGURATION DISPLAY
FUNCTION KEYS
The right-hand function keys are used to change the status and configuration of
the DP6.
When the instruments is switched on the configuration last used is restored
and displayed.
To change the existing configuration, press SEL the first changeable parameter will
flash. To change this flashing parameter press CHG the display will then show a
second menu giving the next selection alternatives to choose from. To select one
of these options, press the button below the function required
?
the symbol guides
you down to the correct key. Once the choice has been made and entered, the
display will return to the initial format and the next parameter to be changed will
flash. Follow the same procedure to change this parameter (press CHG and select
next option from the new menu). Each time the SEL button is pressed, the cursor
moves on to the next changeable parameter, scrolling right throughout the
selection. After you have made the final parameter selection, press SEL to remove
the flashing cursor and return to the fixed display which will now show the
chosen set-up.