Scotsman SCCG30 - Manual (Page 28)

Removal and Repair - Cabinet Removal
Certain components require the removal of the
cabinet for repair access.
1. Shut machine off, if making ice, melt ice with hot
water.
2. Remove all ice.
3. Drain reservoir.
4. Remove service panel and kick plate.
5. Remove back panel.
6. Disconnect electrical power.
7. Disconnect water and drain tubing.
8. Remove door.
9. Remove top panel.
10. Remove curtain & hanger.
11. Locate elbows where water flows onto the
evaporator platen.
12. Pull clip up and pull water inlet elbow out of
inner elbow.
13. Push inner elbow back and rotate it until it
points straight up, then push it back through the
hole in the back of the freezing compartment.
14. Remove two screws holding freezing
compartment brackets to cabinet, lift brackets up.
September 2009
Page 27
SCCG30 & SCCP30
Service Manual
Electrical Shock
Hazard.
Disconnect electrical
power before
beginning removal
Inner
Elbow
Clip
Inlet Elbow
Bracket