Scotsman ND550 - Manual (Page 2)

FOR THE INSTALLER: Specifications
This ice maker-dispenser is designed to be
mounted on a machine stand, or a countertop, or
using wall mounting kit KWB3, hung from a wall.
The sink may be retained, or removed and the
optional longer splash panel (KSP1B) installed in
place of the original. Instructions for each kit are
included in this service manual. Before beginning the installation, check that all the
materials and kits required are available at the
installation location.
SPECIFICATIONS
+ Minimum Circuit Ampacity is used to figure wire size and type per National Electric Code.
ND550AE-1A
ND550WE-1A
ND550AS-1A
ND550WS-1A
41 x 26 x 22.5
same
same
same
NUGGET
same
same
same
Air
Water
Air
Water
115/60/1
115/60/1
115/60/1
115/60/1 16.7
16.2
16.7
16.2 20
20
20
20
Maximum
Fuse
Size
Minimum
Circuit
Ampacity+
Basic
Electrical
Condenser
Type
Ice
Type
Dimensions
(w/o stand)
H" x W" x D"
Model Number Cabinet
Finish
Painted
Painted
Stainless
Stainless
14.06"
1.88"dia
20.5"
22.5"
2.56"
Optional for water and
drain lines
NAMEPLATE
on inside of
right side panel
ELECTRCIAL JUNCTION BOX
3/8" FPT
Condenser
Water Inlet
(Water Cooled)
1/2" FPT
Cond. Drain
(Water Cooled)
3/4" FPT
Drain
12.27"
1.12"
3.12"
5.12"
6.43"
4.5"
3.54"
3/8" Flare
Potable Water Inlet
ND550
August, 1989
Page 2