Dialogic 4000 - Manual (Page 21)

Dialogic® 3000 and 4000 Media Gateway Series Quickstart Guide
page 21
Enabling the Microsoft ® Mediation Server on a Dialogic ® 4000 Media Gateway Series
The Dialogic
®
4000 Media Gateway is a co-located Media Gateway for Microsoft
®
Office Communications Server
(OCS) 2007; therefore, the Microsoft
®
Mediation Server will be running directly on this device. The device must
be part of the same domain as the OCS.
The required steps are:
1. Install the Microsoft OCS 2007 and add the Dialogic 4000 Media Gateway to the same domain of the OCS.
2. Restart the computer and login with the account that has domain administrator rights.
3. Activate the Mediation Server. To do so, open a Dos box and enter:
C:\Install\Microsoft\Mediationserver-for-DGM4000
and execute the following command:
lcscmd.exe /MedSrv /Action:Activate /Password:
4. If the activation was successful, continue with the configuration of the Mediation Server using the MMC of
OCS 2007. You will find the MMC under Start > Settings > Control Panel > Administrative Tools >
Office Communications Server.
5. Request, retrieve, and import a certificate from a CA (Certificate Authority) and add it to the Mediation
Server. Refer to the OCS 2007 documentation for more information about how to accomplish this.
Note: This step needs to be undertaken while you are directly logged on to the Media Gateway. It cannot
be undertaken using the MMC of the OCS 2007 on another PC in the domain.
6. The remaining configuration steps for setting up the Mediation Server can be done remotely by using the
MMC of the OCS 2007 on another PC in the domain.