Dialogic 4000 - Manual (Page 20)

SIP Configuration
page 20
• For SIP to PSTN, enter a name and select the direction. Select the SIP peer as source and the controller
you want to use for this routing as Master. Leave the remaining settings at their default values.
Click OK to save the settings and to close the window.
6. If you have configured all settings, click Save in the main configuration page to save the settings and to
activate the changes.
For the settings in other environments, consult the user guide of your respective SIP client.
7. If you use a Microsoft
®
Mediation Server on the Dialogic 4000 Media Gateway Series go to Enabling the
Microsoft® Mediation Server on a Dialogic® 4000 Media Gateway Series on page 21, before you start the
service.