Scotsman FB1222 - Manual (Page 27)

Auger Warning - Press and release the Down arrow to view the
Ice Detect Warning - Press and release the Down arrow to view the
Any of the above can be modified by changing the settings as noted below.
The warning set points can be adjusted to match local conditions, so that
when they change the Smart-Board provides a notice of the change.
To Change Setup Settings:
From a specific Setup Menu Item, press SEL key to get to Setup screen. Push
and release the SEL key to move the underline to another number.
Push and release the Up or Down arrow key to change the marked character.
Push and release the Select key to move to the next character, repeat prior
step to change the character.
When done, push and release the Enter key.
Example 1: Change Contact Phone Number
Push the Down arrow key until Setup is visible and the S is underlined. Press
Enter.
Repeatedly push and release the Down key until the Contact Phone Number
appears. Press SEL key to get to the Setup screen
Push and release the SEL key to move the underline to the number you wish
to change. Push and release the Up or Down arrow key to change the marked
character.
Push and release the Select key to move to the next character, repeat prior
step to change the character.
When done, push and release the Enter key.
August 2011
Page 11
NB0622, NB0922, FB1222, NB1322
Information Display
Revision
Setup
Set Contact Phon
1800SCOTSMAN
Ice Detect
warning setpoint
Auger warning
setpoint