Scotsman FB1222 User Manual
Page 22
Advance Fault Definitions - Flaker or Nugget
Self-Test Failure
The controller checks for proper operation at power up. If the check shows a problem, this warning or
fault will be displayed.
No Ice Pending
The controller monitors ice making using the photo eyes. If falling ice is not sensed by the photo-eyes,
and if it is NOT the third consecutive time it has occurred, this warning or fault will be displayed.
No Ice Strikeout
If the controller fails to sense ice for a third consecutive time, this warning or fault will be displayed and
the machine will be shut down.
Auger High Load Pending
The controller monitors the current used by the auger drive motor. If the current exceeds the limit, and if
it is NOT the third consecutive time that it has, this warning or fault will be displayed.
Auger High Load Strikeout
If the auger motor draws too much current for a third consecutive time, this warning or fault will be
displayed and the unit will be shut down.
No Water
If the water level sensor is dry or the water is too pure, this warning or fault will be displayed, and the unit
will be shut off.
Refrigeration Pressure Too High/Low
There are two pressure switches on the machine, if either one opens due to an over or under pressure
condition, the controller will display this fault or warning.
August 2011
Page 6
NB0622, NB0922, FB1222, NB1322
Information Display