Scotsman CB0522 - Manual (Page 28)

August 2011
Page 28
CB0522 through CB1030
Information Display
Status List
Press and release the down arrow to underline the S in Status. Press and
release the Enter button to see:
Warranty Start shows "Starts at 24HRS run time"; after 24 hours of run
time, shows warranty start date.
Discharge Temp in degrees F., Then press and release the Down arrow
key to see:
Sump Temp in degrees F. Then press and release the Down arrow key to
see:
Board Voltage - from the transformer. Then press and release the Down
arrow key to see:
Bin Level number. Displays level currently sensed. Then press and release
the Down arrow key to see:
Bin set point: Displays level currently set. Then press and release the
Down arrow key to see:
Freeze Timer: Freeze time. Press and release the Down arrow key to see:
Harvest Timer:: Harvest time. Then press and release the Down arrow key
to see:
Freeze Counter: Then press and release the Down arrow key to see:
Water Quality.: Measurement of the conductivity of the reservoir water.
Typically between 20 and 60, lower numbers mean higher mineral content.
Then press and release the Down arrow key to see:
Flush Used: The WaterSense system selected this purge setting. Reads
255 if sump empty. Then press and release the Down arrow key to see:
Long Freeze Strike: Long Freeze Strike number. Number of long freeze
errors in memory. Then press and release the Down arrow key to see:
Long Harvest Strike: Long Harvest Strike number: Number of long harvest
errors in memory. Then press and release the Down arrow key to see:
Min Frz Strike: Minimum freeze strike number Then press and release the
Down arrow key to see:
Pwr Interrupts: Number and time of power interruptions. Then press and
release the Down arrow key to see:
Bin Stat: Open or Closed. Open is normal when no bin thermostat is
attached or there is no ice on a thermostat. Then press and release the
Down arrow key to see:
Disch Frz Set: In degrees F. Shows the discharge temperature recorded as
a set up number. The set up number is used for determining how long the
fan is off at the end of the freeze cycle.
Adv Faults
Status
Discharge Temp:
157
Sump Temp:
38
Board Voltage:
14
Bin Level:
13
Bin Setpoint:
9
Freeze Timer:
00:00
Harvest Timer:
00:00
Freeze Counter:
0
Water Quality:
0
Flush Used:
0
Long Frz Strike:
0
Long Hrv Strike:
0
Min Frz Strike:
0
Pwr Interrupts:
0
Bin Stat:
Open
Disch Frz Set:
0
Warranty Start:
Starts at 24 HRS