Scotsman CB0522 - Manual (Page 26)

August 2011
Page 26
CB0522 through CB1030
Information Display
Group Screens
Within each group are several screens of information or settings, like
times, that can be viewed.
Date and Time Groups: No submenus are available.
Warnings: Press and release the Enter button to see information on
current Warnings.
Press and release ESC to return to the prior menu.
Base Faults: Press and release the Down arrow to underline the B in
Base Faults, then the Enter button to see in the display:
Most recent failure (labeled 0) and how long ago it occurred (in hours),
then press and release the down arrow to see:
Second to most recent failure (labeled 1) and how long ago it occurred
(in hours), then press and release the down arrow to see the third,
fourth, fifth, and so on up to ninth where the list ends.
If there are no errors, the screen will display End of Errors.
Note: Base Faults are cleared when the controller's are cleared.
Press and release the escape button to return to the main menu tree.
Press and release the down arrow key to underline the A in Advanced
Faults.
Advanced Faults: Press and release the Enter button to see in the
display:
Most recent failure and the exact time it occurred. Pressing and
releasing the down arrow cycles through the other failures back to the
oldest.
Note: Advanced Faults are not cleared by the controller, instead they are
cleared by using the Clear Fault History screen in Setup.
At the end of the list the display will show directions to go back to the
main menu.
Press and release the escape button to return to the main menu tree.
Warnings
Base Faults
Warnings
Base Faults
End of Errors
Base Faults
Adv Faults
fault que end
up arrow = back
esc = main menu