RLE TH140D - Manual (Page 3)

VERIS INDUSTRIES
™
inStallation GUiDe HWl SerieS
Z202637-0Y PAGE 3 ©2010 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 09101
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
7. Install and configure the sensor.
8. Install the cover and snap into place.
VOLTS
OUTPUT SELECT
mA
RH OUT
10V 5V 10V 5V
50/95 32/122 C F
T OUT
T RANGE T SCALE
WARNING: Output select must be
correct before applying power.
RH
SENSOR
TEMP
SENSOR
VOLTS
OUTPUT SELECT
mA
RH OUT
10v 5v 10v 5v
50/95 32/122 ºC ºF
T OUT
T RANGE T SCALE
6. Wire the backplate.
POWER SOURCE
15 to 30VDC or 24 VAC
DIGITAL CONTROL
RH Return
Temp Return
Thermistor/RTD Override
Setpoint Slider
-
--
+
RTD/Thermistor
RTD/Thermistor
Temp Transmitter OUT (4-20mA RTN)
Slider Right
Slider Wiper
Slider Left
RH OUT (4-20mA RTN)
POWER SOURCE
15 to 30VDC or 24 VAC
DIGITAL CONTROL
RH IN (0-10V)
Temp IN (0-10V)
Thermistor/RTD Override
Setpoint Slider
-
--
+
GND
RTD/Thermistor
RTD/Thermistor
Temp OUT
Slider Right
Slider Wiper
Slider Left
RH OUT
Current Output (2 wire, 4-20mA)
Voltage Output (3 wire, 0-10V)
5. Mount the backplate onto the wall using the screws provided.
Five screwholes available; use a mini-
mum of two for secure mounting.