RLE TEAMS User Manual

Tea series, Notice, Wall mount temperature transmitters

Z204260-0A

PAGE 1

03121

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

ENVIRONMENTAL SENSORS

INSTALLATION GUIDE

Wall Mount Temperature Transmitters

Installer’s Specifications

Input Power

4-20mA version: loop powered 24VDC only;

0-10V

version: 3-wire, observe polarity, 12-30VDC;

0-5V

version: 3-wire, observe polarity, 24VAC, 12-30VDC

Analog Output, mA version

2-wire, not polarity sensitive (clipped and capped)

Sensor Type

Solid state, integrated circuit (transmitter)

Accuracy

±0.5°C (±01°F) typical

Temperature Range 10° to 35°C (50° to 95°F)

TEA SEriES

DIMENSIONS

NOTICE

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classiﬁed locations.
• Read and understand the instructions before installing
this product.
• Turn oﬀ all power supplying equipment before working on it.

• The installer is responsible for conformance to all applicable codes.

PRODUCT IDENTIFICATION

INSTALLATION

1. Disconnect power to the junction box.

2. Remove junction box cover.

3. Wire as shown (see Wiring Diagrams)

4. Screw TEA cover onto junction box.

4.5"

(115 mm)

0.3"

(6 mm)

0.5"

(13 mm)

2.8"

(70 mm)

3.2"

(82 mm)

Output

US or EU

M =4-20mA
V = 0-10VDC
J = 0-5VDC

= Standard

TEA