DTS RV4700 DTS-ES - Manual (Page 10)

Universal Remote Controls
10
Note
• For enhanced Universal Remote Programming instructions and manufacturer’s codes, please refer to the operating manual
inclosed with this Universal Remote Control.
Notes:
• The setup code for each component must be entered before operation.
• For setup codes(manufacturer’s codes), please refer to “Set-Up Code Tables” in the operating manual of this remote control.
• Some operation buttons have different functions according to each operation mode.
• Be sure to set the remote control to the correct mode before operation.
DVD
VOL. CH LEVEL
OSD CH SEL
DSP
MODE
AUTO
ST
CENTER
MODE
TEST
TONE
DISC
P.SCAN
TUNER CD T1/MON AUX PHONO
VID1 VID2 VID3 VID4 VID5
SYS DISP SLEEP DIRECT IN ROOM2
INTRO
RETURN
B
RPT
A
7.1 SURR
TITLE
ENTER
HOME THEATER MASTER
RV4700 DTS-ES
LED LAMP
DEVICE BUTTONS
To operate the desired component with this remote
control, first select the corresponding DEVICE button.
POWER BUTTON
ENTER BUTTON
NUMERIC(1~0) BUTTONS
• For selecting preset stations in tuner mode.
• For selecting a track or a disc in CD mode, etc.
• When selecting a disc, select disc No. (1~5)
within 2 sec. after pressing DISC(marked
"P.SCAN") button.
LIGHT BUTTON
Activates the backlighting of the remote control
for 7 sec. If any other button is pressed while
the backlighting is on, the remote control will
remain backlit for an additional 7 sec.
VOLUME UP/DOWN( / ) BUTTONS
CHANNEL LEVEL UP/DOWN( / )
BUTTONS
CURSOR CONTROL( , , , )
BUTTONS