Transition, Menu orientation – RGBLink VSP 516S User Manual User Manual

Page 52

4. Menu Orientation

VSP 516S User Manual 52

Note

TEST PATTERN: Test pattern setting, rotate the knob, there are 66 kinds of

modes for choose.

Notice: When the input comes from DVI, Displayport (DP), VGA, or SDI

(input format is progressive only), the TEST PATTERN function will be

enable and ready to operate.

FLAT COLOR: When the output mode is pure color image, choose

corresponding red, green and blue color value in this option to meet the

practical needs.

GAMMA: Gamma setting, press it to adjust the image gamma value;

Gamma values include: -1.2, -1.4, -1.6, 1, 1.2, 1.4, 1.6, sRGB.

Choose [TRANSITION], push the knob to confirm, the OLED display show

the level 2 menu as following:

MODE: Switch mode, including the following modes:

CUT: Seamless switching.

FADE: Fade in fade out effect switching.

POP L+T:

PUSH L+T:

POP R+T:

PUSH R+T:

The FREEZE button can also fulfill this setting.