RGBLink VSP 516S User Manual - Manual (Page 30)

2. Hardware Orientation
VSP 516S Back Panel
VSP 516S User Manual 30
The figure below illustrates the professional interface and control signals of
VSP 516S back panel with two sending cards.
NO INTERFACE NO INTERFACE
1 3G-SDI input BNC CVBS port 18~20 CVBS Input BNC port
2 Dial the code switch 21 S-Video DIN 4
3.6.7.11.12 10/100M Interface RJ45 22 DVI Input DVI-I
4.9.14 USB Interface 23~25 YPbPr Input
5 RS232 Interface 26 VGA Input DB15 port
8.13
Power supply port of
Sending Card
27 Audio Output
10.15
DVI input port of
sending card
28 DVI Output DVI-I
16 Switch 29 DVI+VGA DVI-I Output
17 Displayport Input 30 Power IEC-3 port
CONT Interface
2: Dial Switch
If the two dial switches are upwards, the device is in normal work, and if
they are downwards, the device is in upgrade state. OLED module light is
off when the device is in upgrade state. Some of the button lights turn on,
and the device will not work.
3: 10/100M UDP Interface
Used to connect the windows control program or device upgrade.
4: USB Interface