RGBLink VSP 516S Quick Start - Manual (Page 14)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
13
How to Set up the Volume
In single image mode, the operations are as follows:
1. Push [MENU/EFFECT] to enter the menu items, turn the knob, choose [AUDIO], push the knob to
confirm, turn the knob, and choose [MUTE].
2. Turn the knob, and choose
“OFF”, disable the mute function.
3. Turn the knob, choose , turn the knob to adjust the volume.
In PIP mode, first, choose IMAGE A or IMAGE B as audio input source, specific steps are as follows:
MENU AUDIO AUDIO IN IMAGE A/IMAGE B, or push the [IMAGE1/IMAGE2] button,
choose IMAGE A or IMAGE B, then repeat the step1 to 3 above.
How to Set up the Playlist
Users can set up VSP 516S in “Device Schedule” in windows control program to play the appointed
input video automatically in appointed time and operation of single or dual channels, and set up the
ratio and position.
Users can setup up to 10 timing operations in the schedule.
1. First, make sure the VSP 516S has been connected to windows control program.
2. Double click the VSP 516S software, software interface is shown as follows: