System, Menu orientation – RGBLink MSP 200 User Manual User Manual
Page 29
3. Menu Orientation
MENU
MSP 200 User Manual 29
SMPTE: This option includes 23 kinds of common output resolutions:
487i@60, 576i@50, 483P@60, 576P@50, [email protected], 720P@24,
720P@25, [email protected], 720P@30, 720P@50, [email protected], 720P@60,
1080i@50, [email protected], 1080i@60, [email protected], 1080P@24,
1080P@25, [email protected], 1080P@30, 1080P@50, [email protected],
1080P@60.
TIME CODE: Include the following items:
POSITION: User can custom the position of time code.
COUNT: Choose Start, the time will display on both the touch screen and
LED display synchronously, user can check if the if signal on LED display is
delay.
MOTION: Choose ON, the test pattern will move to the top left corner.
While choose OFF, the test pattern will be static.
GENLOCK HS VS: User can choose HS or VS.
GENLOCK Y: Choose ON, VGA no output.
Choose [SYSTEM], the touch screen shows level 2 menus as follows:
SN: 0030
TOP MCU VERSION: V1.20
BOTTOM MCU VERSION: V1.16
FPGA VERSION: V1.03
BOARD TEMPERATURE: 41°C, 105°F
BATTERY VOLTAGE: 7.13V 63%